2022 MI SWACO CD 400 HV ATEX

www.vidaeq.com

NEW, NEW, NEW

The complete specification sheets are located in the DOCUMENTS section below.

CD 400 HV SL VFD ATEX

Slim Line, VFD ready

High Volume Centrifuge to be used on global drilling projects where the most efficient fluids/solids separation is required 

Dimensions 

Overall Dimensions & Weight 

Weight 4,800 kg (10,600 lbs) 

Length X 4,469 mm  (175.9 in.) 

Height Y 1,771 mm  (69.7 in.) 

Width  Z 1,190 mm (46.9 in.) 

Performances 

G-Force & Feed Rate 

Max Design Speed 3,600 rpm 

Max Operating Speed 3,450 rpm 

Max G-Force 2,700 G @ 3,450 rpm 

Max Sigma Value 3415 m2 (36,759 ft2) 

Max Solids Discharge Rate 7.9 m3/h (35 GPM) 

Physical Data 

Rotating Assembly 

Bowl Diameter (Internal) 406 mm (16 in.) 

Bowl Length (Internal) 1,460 mm (57.5 in.) 

Pond Setting 77 (R130) – 67 (R140) – 57 (R150) mm  (3.04 – 2.64 – 2.24in.) 

Bowl Material Stainless Steel Duplex A890 

Bushings Protection Tungsten Carbide Solids Discharge Nozzle 

Scroll Type Single Lead – Quasi Axial Flow 

Scroll Pitch 130 mm (5.12 in.) 

Scroll Angle 7° 

Scroll Material Stainless Steel Duplex A890 - AISI 304 

Flights Protection Scroll Fitted with Tungsten Carbide Tiles 

Pillow Block Bearings Grease Lubricated - Automatic 

Internal Bearings Grease Lubricated - Manual 

Feed Tube Open Ended 

Physical Data 

Gearbox 

Type Planetary Gearbox, Ratio 87:1 

Max Output Torque 5,000 Nm (3,688 ft·lb) 

Operating Differential 1 – 45 rpm 

Drive & Operating System 

Voltage 400/460 Volt, 50/60 Hz, 3 Phase - Standard 

Other Ratings Available Upon Request 

Main Drive Motor 45 kW (60 HP) 

Back Drive Motor 15 kW (20 HP) 

Control System PLC (Programmable Logic Controller) 

Drive System VFD (Variable Frequency Drive) 

Safety Features 

Safety Devices 

Torque Limiter to Protect Sun-wheel Shaft, 

Micro-switch on Vessel & Guards to Avoid 

Start-up While Servicing, Main & Back Drive 

Motor Temperatures. 

Display (Settings) 

Bowl Speed, Differential Value, Feed Rate, 

Current Adsorbed, Vibration, Bearings & 

Feed Pump Stator Temperatures. 

Automatic Safety System 

Continuous Monitoring & Self Shutdown on All Critical Parameters.

Automatic Control to Avoid Pack-off & Automatic Unplugging Procedure. 

Certification 

Certification CE, ATEX Zone 1 

Operating Temperature -20 +55°C (-4 +131 °F) 

Storage Temperature -20 +55°C (-4 +131 °F) 

Process Fluid Temperature Drilling Fluid: < 85°C (185°F) 

Nozzle Schedule 

Connection 

Feed Pipe 1-1/2” ANSI B 16.5 #150 

Liquid Discharge 8 in. Victaulic 

Solids Discharge Rectangular pattern. Rubber skirt included. 

The complete specification sheets are located in the DOCUMENTS section below.

Please contact us for further detail and pricing.

Thank you!

Subject to prior sale and/or other disposition.

All Items to be quoted in US currency. All prices and availability are subject to change without notice and are subject to applicable sales tax. Title to all goods listed remain with the seller until the purchase price is fully paid. Equipment is purchased as is, where is, without warranty unless otherwise specified. Use hours are estimate hours as of the date of this posting and are not guaranteed. Equipment pictured may contain attachments and/or accessories not priced in this offer. Sale subject to terms and conditions on final bill of sale.

Contact for additional details or to schedule an inspection:

Jose Lozano

jlozano@vidabem.us

+1 661 303 3190

www.vidaeq.com